Adam Wilder 의 도색 기법과 신작
갤러리 > 기타 미니어처
2009-03-30 15:51:45,
읽음: 9075
박철한

원문을 그대로 옮겼습니다.
A base-coat was applied then additional tones for colour variation where added using a mix of different oxide Tamiya paints thinned with lacquer thinner.

A sponge was then used to obtain more bits of different coloured rust.

I didnt like that large amounts of hairspray that my can was spraying into the model. I also wanted to only paint one steel ingot at a time. I sprayed the hairspray into a cup then poured it into my airbrush eliminating problems such as uneven coats of hairspray and lack of control with distribution.


I again mixed a light blue from Tamiya paints but this time thinned the tone with tap water. This layer represents mill scale. After a random coat was applied I removed the desired amounts using an old stiff brush and tap water.

After sealing the peace with three to four matt coats I blended different coloured enamels mixed with pigments onto the rusty areas for variation in the rust tones.



After the enamel rust graphite was added onto the mill scale to give it more of a metallic appearance contrasting nicely with the areas of matt rust.





궁금하신 분은 여기로 가보시길...
댓글엔 답글 못해드리니 양해바랍니다.
같은 그룹의 다른 콘텐츠
날짜
댓글
읽음